Lift Strap Guide Basket (Tape Guard)

Black plastic "tape guard" folds to form a basket to guide the front lift strap.

Note that there are two versions. Please read the following and select the appropriate size below. Keep in mind that lift assemblies have been swapped around on a number of machines over the years, so it is recommended that the physical measurements be compared along with the model number.

The 5.5" version (GE 541C997P1 or Wheelhorse 522161) is used on most later models. It measures 5-1/2" X 6-7/8" overall, with the center of shaft located approximately 3" from the center of the spacer shaft.

The 6.5" version (GE 541C997P2 or Wheelhorse 522162) is used on the early models: E15AA, E15BA, E12AA and E16RA. It measures 6-1/2" X 6-7/8" overall, with the center of shaft located approximately 4" from the center of the spacer shaft.

Fits B-145, C-185, E12, E12S, E14, E15, E16, E20, I2 and I5 models, subject to the above restrictions.