|_ Paint & Finishes
|_ Walk behind
All Products ...
Drive Belt (regular)
Oil, heat and abrasion resistant V-belt, sized to fit stock tractors models E8, E10, EGT-80 and EGT-100. If the optional speed reduction kit is...
Drive Belt (reduced speed)
Oil, heat and abrasion resistant V-belt, sized to fit models E8, E10, EGT-80 and EGT-100 with the optional speed reduction kit installed. For stock...
Heavy duty relay to control PTO outlet. Fits E8 & E10 (versions AA-CA), E12 (versions CA, DA and HA), E12M (version EA), E12S, E14 (version RC, RD,...
Charger Capacitor - 2 mfd
Replacement 2 uf capacitor. Fits E8, EGT-80. ER8-36. As chargers have often been swapped between tractors over the years, it is important to check...
Charger timer decal (A-J)
Round decal for charger timers, marked "A" through "J", outer and inner circles are pre-cut. Fits all small frame and later large frame models.
Charger Diodes (set of 2)
Press-in diode for charger heat-sink/diode assembly. Two versions available (select below): Regular version has a wire lead and same current ratings...
... more info
Side 'Heavy Duty' decal set (E8M)
Vinyl decal set for sides of front battery box. Red on clear. Two decals, for left and right sides. For use on E8 tractors with six batteries. Part...
Side body decal set (E8M)
Vinyl decal set for sides of front battery box. Black on clear. Four decals total: two "E8M" decals for left and right sides, one striped decal for...
Seat housing decal set (E8 & E10)
Vinyl decal set for rear seat housing. Seven decals total: two GE decals for left and right sides, one Elec-Trak decal for rear, two reflective red...
Seat housing rear decal (E8 & E10)
Vinyl decal for rear of seat housing. For use on E8 and E10 tractors. Included in the 'Seat housing decal set'; sold separately as also makes a...
Knob - Shifter
1-23/32" black phenolic knob with threaded brass insert in 1/2" shank. Screws onto end of gear shift lever. Fits models E8, E10, EGT-80, and EGT-100...
Replacement 3-prong PTO receptacle. Fits B-145, C-185, E12, E12M, E12S, E14, E15, E16, E20, EGT-120, EGT-150, EGT-200 and I-5 models. Mounts in...
Brake switch, 2-7/8" spring-loaded actuator lever. Includes stainless steel mounting hardware. Fits B-145, C-185, E8*, E10*, EGT-80*, EGT-100*, E12,...
Parking Brake Decal (E8 and E10)
Vinyl parking brake decal. Applies to frame near brake pedal. Black on on yellow. For use with E8M and E10M models. Part numbers 244A7471P1 and...
... more info
PTO switch (3 position)
3-position PTO switch: off, on, and start (momentary) mounted in dash to control the mower deck. Fits E8, E10, EGT-80, EGT-100 and some large-frame...
Shipping & Returns
Payment & Policies
Elec-Trak Help Files
All Content Copyright © 2007-2013
Free Range Electric, LLC
Waynesboro, VA 22980